eIcons - eJimi www.islabikes.co.uk
Step 2 of 12
Place front wheel in fork and install
the thru axle
Step 1 of 12
Remove front wheel and
fork packaging
1. Remove front wheel
protection packaging.
2. Remove brake caliper spacer
DO NOT PULL BRAKE when caliper spacer is removed.
Please keep caliper spacer for transportation when wheel
is removed.
1. Place the front wheel into
the fork dropouts.
2. Push the thru axle through
the clearance hole in the right
(driveside) leg of the forks and
through the wheel hub up until
the axle reaches the thread in
the opposite fork leg.
To Next Page
Loading...
