iSMA CONTROLLI iSMA-B-AAC20 - LCD System Menu Access and Options; LCD System Menu; Info; Local I;O

iSMA-B-AAC20 LCD Display User Manual
www.ismacontrolli.com
DMP234en | 1st Issue rev. 4 | 02/2022
page 5 of 23
•
•
•
•
•
•
•
•
•
3 LCD System Menu
The iSMA-B-AAC20 controller with the display has an option to log in to the system menu
without a necessity to add any additional components to the Sedona environment.
Log in/log out system menu process:
Press and hold the F1 key (displays "Enter Password");
Use the arrow keys (the change of the digital value by 1) and move through the coming
fields (using the Enter key), enter the password to the system (a 4 digit number, 1000
is a default value);
Approve the input password by pressing and holding the Enter key;
Cancelling the login process and exiting from the system menu – press and hold the
Esc key.
The system menu consists of the following components:
Info: provides information about your device and hardware resources;
Local I/O: contains information about the current values of inputs/outputs of the
physical devices and their configuration options;
Network Config: changes the IP address of the device and the port and address of the
Modbus TCP/IP protocol;
Change password: changes the password to log in to the system menu and to the
website (editing the Device Password slot in the Plat component);
Reboot: restarts the device (required when you change the IP address).