11
MIN/MAX Button
The MAX/MIN mode records the min. and max. input values. When the input goes below
the recorded min. value or above the recorded max. value, the meter records the new
value . Press “HOLD” button to pause the recording.
Peak HOLD (for IDM99-III only)
In the Peak HOLD function, the meter records the peak min. value and the peak max. value;
when the inputs goes below the recorded peak min. value or above the recorded peak max.
value ,the meter records the new value . Press "HOLD" button to pause the recording.
To Next Page
Loading...
Need help?
General
