EasyManuals Logo

Iso-Tech IDM 98-III User Manual

Default Icon
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
IDM 98-III / 99-III English
16
Low battery and Battery Replacement
Replace the battery as soon as the low battery indicator appears to avoid false reading.
Refer to the following gure to replace the batteries
SECTION 5 - SPECIFICATIONS
General Specications
Maximum voltage applied to any terminal : 1000 Vac rms or 1000 Vdc. rms
Display : 6000 counts.
Polarity Indication : Automatic, positive implied, negative indicated.
Overrange Indication : OL
Batteries Life : 150hours alkaline battery (No backlight)
Low Batteries Indication : Voltage drops below operating voltage, "
" will ash.
Power Requirement : PP3 9V battery
Auto Power Off : 20 minutes.
Operating Temperature : -10 ~10°C
10°C ~ 30°C (80% RH),
30°C ~ 40°C (75% RH),
40°C ~ 50°C (45%RH)
Storage Temperature : -20°C to 60°C , 0 to 80% R.H. (batteries not tted)
Temperature Coefcient : 0.15 x (Spec.Accy) / °C, < 18°C or > 28°C .
Measure : Samples 3 times per second .
Altitude : 6561.7 ft (2000m)
Safety : Complies with EN61010-1, UL61010-1,IEC 61010-1, CAT IV 600V, CAT III 1000V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Iso-Tech IDM 98-III and is the answer not in the manual?

Iso-Tech IDM 98-III Specifications

General IconGeneral
BrandIso-Tech
ModelIDM 98-III
CategoryMultimeter
LanguageEnglish

Related product manuals