22
(10) Temperature (For IDM99-III only)
Input Protection : 1000V
DC
or 1000V
AC
rms
* Does not include accuracy of the thermocouple probe.
* Accuracy specication assumes surrounding temperature stable to
± 1°C. For surrounding temperature changes of ± 5°C, rated accuracy
applies after 2 hours.
(11) AC+DC Voltage
Note: When measuring AC+DC, the AC signal may contain a DC level, the AC+DC True
RMS value might not be accurate if the peak voltage of AC+DC value is over full scale.
Additional specication are same as voltage function.
(12) AC+DC mV
Additional specication are same as voltage function.
IDM99-III
Range Resolution Accuracy
-40.0°C ~ 400°C 0.1°C ± (1.0% + 10d)
-40.0°F ~ 752°F 0.1°F ± (1.0% + 18d)
IDM98-III/IDM99-III
Range Resolution IDM98-III Accuracy IDM99-III Accuracy
6.000V 0.001V
± (2.5% + 5d) ± (2% + 5d)
60.00V 0.01V
600.0V 0.1V
1000V 1V
IDM98-III/IDM99-III
Range Resolution IDM98-III Accuracy IDM99-III Accuracy
60.00mV 0.01mV –
± (2% + 10d)
600.0mV 0.1mV ± (2.5% + 5d)
To Next Page
Loading...
Need help?
General
