12.0 WEB INTERFACE
The E3-MAC Series Emergency Lighting Inverter comes standard with capability to
connect to the web for access to all the system logs and programmable features. To
logon to the E3-MAC, simply go to Isolite.com and click on the Inverter Monitoring link
under the Resources drop-down menu and follow the User Setup instructions below.
12.2 User Setup:
User Account set up requires a valid Central Inverter System serial number to setup
up an account. With a verification of a valid serial number the following information is
required for the user to finish setting up the account:
Customer Name, Username, Password, Address (up to 2 lines), City, State, Country,
Phone1, Phone2 and Email address.
• This information is required for the Factory to Verify and Authenticate the
account. If account information is not valid, the factory will remove account
and deny access to machines.
Once the user has gone through this account setup process, they can access critical
information on their system by logging into their account and clicking on the Control
Panel icon for their machine.
Control Panel (System Home) Page
The Control Panel acts as the Systems Home Page. From this page, it is possible to see
several critical functions listed below plus several icons will link the user to many more
features.
Meter Functions – Input Voltage, Output Voltage, Output Current, Output VA, System
Battery Voltage, Battery Current (charging and discharging), Battery Power, System
Temperature, System Days, Inverter Minutes and System Events.
Also included in the Control Panel is the System Status and include indicators for
Battery Charging, Inverter Power On, AC Present, System Ready, and Switched Load
Energized. The Alarm Summary indicator and critical alarms indicators include Unit in
Bypass, Circuit Breaker Trip, Startup Fault, Charger Fault and Inverter Fault.
A System Test can be initiated by an icon located on the Control Panel. Immediately
after pressing this Icon, the system will perform a system test and when complete will
record test parameters in the Test Log. Please see System Logs for details.
From the Control Panel Page the user has access to several links and include User Setup,
Alarms, Charts and Graphs and System Logs. Just click on the icons on the home page to
access these features.
To Next Page
Loading...
