EasyManua.ls Logo

Isotherm CR 200 - User Manual

Isotherm CR 200
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation & operating instructions
Isotherm Refrigerator/freezer CR 200
& CR 200 Stainless Steel-INOX
Indel Webasto Marine USA, Inc.
3400 Gateway Drive
Unit 107
Pompano Beach, FL 33069
Tel +1 954 984 8448, +1 800 422 9711
Fax +1 954 979 2533
E-mail: info@indelmarineusa.com
www.indelwebastomarineusa.com
Question and Answer IconNeed help?

Do you have a question about the Isotherm CR 200 and is the answer not in the manual?

Summary

Introduction

General

General operational guidelines for Isotherm refrigerators to ensure optimal performance and longevity.

Safety and Precautions

Critical safety warnings for electrical connections, battery handling, and refrigerant safety.

Environmental Markings

Guidance on proper disposal and recycling of the product according to environmental regulations.

Installation Instructions

Ventilation

Essential requirements for proper airflow around the compressor and condenser for efficient cooling.

Electrical Connections

Instructions for connecting DC (12/24V) and AC (100-240V) power supplies, including safety aspects.

Wire Gauge Selection

Chart and guidance for selecting appropriate wire gauges based on cable length and voltage for 12V/24V systems.

Door Panel

Steps for replacing or mounting additional decorative front panels on the refrigerator door.

Operation

Temperature Setting

How to adjust the internal thermostat for optimal temperature control in the refrigerator and freezer compartments.

Defrosting

Procedure and precautions for defrosting the unit when frost accumulates on the evaporator.

Maintenance

Battery Voltage Sensor

Explanation of the automatic shut-off function that protects batteries from deep discharge.

Technical Data

Fault Finding

Installation Dimensions

Summary

Introduction

General

General operational guidelines for Isotherm refrigerators to ensure optimal performance and longevity.

Safety and Precautions

Critical safety warnings for electrical connections, battery handling, and refrigerant safety.

Environmental Markings

Guidance on proper disposal and recycling of the product according to environmental regulations.

Installation Instructions

Ventilation

Essential requirements for proper airflow around the compressor and condenser for efficient cooling.

Electrical Connections

Instructions for connecting DC (12/24V) and AC (100-240V) power supplies, including safety aspects.

Wire Gauge Selection

Chart and guidance for selecting appropriate wire gauges based on cable length and voltage for 12V/24V systems.

Door Panel

Steps for replacing or mounting additional decorative front panels on the refrigerator door.

Operation

Temperature Setting

How to adjust the internal thermostat for optimal temperature control in the refrigerator and freezer compartments.

Defrosting

Procedure and precautions for defrosting the unit when frost accumulates on the evaporator.

Maintenance

Battery Voltage Sensor

Explanation of the automatic shut-off function that protects batteries from deep discharge.

Technical Data

Fault Finding

Installation Dimensions

Isotherm CR 200 Specifications

General IconGeneral
BrandIsotherm
ModelCR 200
CategoryRefrigerator
LanguageEnglish

Related product manuals