EasyManua.ls Logo

Isotherm CR 65 - User Manual

Isotherm CR 65
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation & operating instructions
Isotherm Cruise & Cruise INOX marine refrigerators
Type: CR 42, CR 49, CR 65, CR 85 & CR 130
Indel Webasto Marine USA, Inc.
3400 Gateway Drive
Unit 107
Pompano Beach, FL 33069
Tel +1 954 984 8448, +1 800 422 9711
Fax +1 954 979 2533
E-mail: info@indelmarineusa.com
www.indelwebastomarineusa.com
Question and Answer IconNeed help?

Do you have a question about the Isotherm CR 65 and is the answer not in the manual?

Summary

Introduction

General

Overview of Isotherm refrigerators, their design, and general operating guidelines for marine environments.

Safety and precautions

Essential safety measures and warnings for operating Isotherm refrigerators to prevent hazards.

Environmental markings

Explains WEEE directive and proper disposal procedures for the appliance to protect environment.

Operation

Temperature regulation thermostat

Details manual thermostat operation and recommended internal temperature settings for optimal cooling.

Temperature setting ASU

Explains the two operating modes (NORMAL.AUTO, MAN.TEMP) for refrigerators with ASU for energy efficiency.

User tips

Practical advice for efficient usage, ice making, loading, and preventing frost build-up.

Defrosting

Guides on when and how to defrost the evaporator and clean the unit to maintain performance.

Maintenance

Battery voltage sensor

Details the function and voltage cut-out/cut-in levels of the battery voltage sensor for battery protection.

Installation instructions

Ventilation

Emphasizes proper airflow for the compressor/condenser unit for optimal cooling and efficiency.

Door front panel

Instructions on how to replace or mount front panels on refrigerator doors for customization.

Reverse the door hinge

Step-by-step guide to change the door hinge side for flexible installation.

Electrical connections;wiring

Details DC (12/24V) and AC (100-240V) connection procedures, wire gauge, and safety.

Wire gauge selection 12 & 24 Volt

Table for selecting appropriate wire gauge based on voltage and cable length for safe electrical connections.

Inner light

Instructions for replacing the inner light bulb in applicable models, including bulb type and procedure.

Wiring diagram

Technical data

Fault finding

Installation dimensions

Summary

Introduction

General

Overview of Isotherm refrigerators, their design, and general operating guidelines for marine environments.

Safety and precautions

Essential safety measures and warnings for operating Isotherm refrigerators to prevent hazards.

Environmental markings

Explains WEEE directive and proper disposal procedures for the appliance to protect environment.

Operation

Temperature regulation thermostat

Details manual thermostat operation and recommended internal temperature settings for optimal cooling.

Temperature setting ASU

Explains the two operating modes (NORMAL.AUTO, MAN.TEMP) for refrigerators with ASU for energy efficiency.

User tips

Practical advice for efficient usage, ice making, loading, and preventing frost build-up.

Defrosting

Guides on when and how to defrost the evaporator and clean the unit to maintain performance.

Maintenance

Battery voltage sensor

Details the function and voltage cut-out/cut-in levels of the battery voltage sensor for battery protection.

Installation instructions

Ventilation

Emphasizes proper airflow for the compressor/condenser unit for optimal cooling and efficiency.

Door front panel

Instructions on how to replace or mount front panels on refrigerator doors for customization.

Reverse the door hinge

Step-by-step guide to change the door hinge side for flexible installation.

Electrical connections;wiring

Details DC (12/24V) and AC (100-240V) connection procedures, wire gauge, and safety.

Wire gauge selection 12 & 24 Volt

Table for selecting appropriate wire gauge based on voltage and cable length for safe electrical connections.

Inner light

Instructions for replacing the inner light bulb in applicable models, including bulb type and procedure.

Wiring diagram

Technical data

Fault finding

Installation dimensions

Isotherm CR 65 Specifications

General IconGeneral
TypeCompressor Refrigerator
Capacity65 liters
Power Source12/24V DC
Cooling TechnologyCompressor
Weight20 kg
Energy ClassA+
Number of Shelves2
Door ReversibleYes
RefrigerantR134a

Related product manuals