EasyManua.ls Logo

Isotherm CR 85 - User Manual

Isotherm CR 85
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation & operating instructions
Isotherm Cruise & Cruise INOX marine refrigerators
Type: CR 42, CR 49, CR 65, CR 85 & CR 130
Indel Webasto Marine USA, Inc.
3400 Gateway Drive
Unit 107
Pompano Beach, FL 33069
Tel +1 954 984 8448, +1 800 422 9711
Fax +1 954 979 2533
E-mail: info@indelmarineusa.com
www.indelwebastomarineusa.com
Question and Answer IconNeed help?

Do you have a question about the Isotherm CR 85 and is the answer not in the manual?

Summary

1. Introduction

1.1 General

General overview of Isotherm refrigerators and usage guidelines.

1.2 Safety and precautions

Critical safety information and warnings for operating the refrigerator.

1.3 Environmental markings

Information on product compliance with WEEE directive and proper disposal.

2. Operation

2.1 Temperature regulation thermostat

How to adjust and use the manual thermostat for temperature control.

2.2 Temperature setting ASU

Setting and operating the ASU for optimal temperature and energy saving.

2.3 User tips

Practical advice for maximizing efficiency and usage of the refrigerator.

2.4 Defrosting

Instructions on when and how to defrost the refrigerator to remove frost buildup.

3. Maintenance

3.1 Battery voltage sensor

Explanation of the battery voltage sensor and its role in protecting batteries.

4. Installation instructions

4.1 Ventilation

Importance of proper ventilation for the compressor and condenser unit.

4.2 Door front panel

Information on replacing or customizing the refrigerator door front panel.

4.3 Reverse the door hinge

Steps to reverse the door hinge for left-hand opening.

4.4 Electrical connections

Guidelines for connecting the refrigerator to DC and AC power supplies.

4.5 Wire gauge selection 12 & 24 Volt

Table detailing recommended wire gauge based on voltage and cable length.

4.6 Inner light

Instructions for replacing the inner light bulb in the refrigerator.

4.7 Wiring diagram

Electrical wiring diagrams for AC/DC, standard thermostat, and ASU models.

5 Technical data

6 Fault finding

7 Installation dimensions

Summary

1. Introduction

1.1 General

General overview of Isotherm refrigerators and usage guidelines.

1.2 Safety and precautions

Critical safety information and warnings for operating the refrigerator.

1.3 Environmental markings

Information on product compliance with WEEE directive and proper disposal.

2. Operation

2.1 Temperature regulation thermostat

How to adjust and use the manual thermostat for temperature control.

2.2 Temperature setting ASU

Setting and operating the ASU for optimal temperature and energy saving.

2.3 User tips

Practical advice for maximizing efficiency and usage of the refrigerator.

2.4 Defrosting

Instructions on when and how to defrost the refrigerator to remove frost buildup.

3. Maintenance

3.1 Battery voltage sensor

Explanation of the battery voltage sensor and its role in protecting batteries.

4. Installation instructions

4.1 Ventilation

Importance of proper ventilation for the compressor and condenser unit.

4.2 Door front panel

Information on replacing or customizing the refrigerator door front panel.

4.3 Reverse the door hinge

Steps to reverse the door hinge for left-hand opening.

4.4 Electrical connections

Guidelines for connecting the refrigerator to DC and AC power supplies.

4.5 Wire gauge selection 12 & 24 Volt

Table detailing recommended wire gauge based on voltage and cable length.

4.6 Inner light

Instructions for replacing the inner light bulb in the refrigerator.

4.7 Wiring diagram

Electrical wiring diagrams for AC/DC, standard thermostat, and ASU models.

5 Technical data

6 Fault finding

7 Installation dimensions

Isotherm CR 85 Specifications

General IconGeneral
BrandIsotherm
ModelCR 85
CategoryRefrigerator
LanguageEnglish

Related product manuals