Need help?Do you have a question about the Isotherm Cruise Line and is the answer not in the manual?
Examine contents for shipping damage and notify carrier if issues are found.
Ensure circuits are off, disconnect power, and follow ABYC standards for electrical installations.
Lists essential tools like drills, wire cutters, suitable gauge wire, and screwdrivers for installation.
Plan installation carefully, protect components from damage, and mount securely for optimal performance.
Proper ventilation is key for compressor efficiency and reduced power consumption.
Ensure a robust electrical installation with minimal voltage loss, using dedicated circuits and proper wiring.
Defrost when frost reaches 1/4 inch; turn off unit and leave door open.
Clean interior after defrosting; clean condenser with vacuum annually or biannually.
Defrost, clean, dry interior; leave door slightly ajar for ventilation to prevent mildew.
Illustrates the wiring diagram for connecting the refrigerator to the power source.
Explains startup procedures, thermostat adjustment, and the built-in electronic protection system.
Provides the electrical connection diagram specific to Isotherm ASU refrigerator models.
Covers control panel functions, two operating modes (NORMAL.AUTO, MAN.TEMP), and indicator lights.
General| Brand | Isotherm |
|---|---|
| Model | Cruise Line |
| Category | Refrigerator |
| Language | English |
To Next Page
