Need help?Do you have a question about the Isotherm CR165 and is the answer not in the manual?
Minimum space requirements for onboard installation: 2 cm above, sides can touch furniture.
Additional 2 cm space on each side for optimal performance and energy saving.
Do not pierce sides with yellow warning label; risk of refrigerant damage.
Table detailing minimum wire sections based on diameter and length for 12V/24V.
Connect directly to battery/switch, use correct fuse/switch, avoid direct connection to charger.
Steps to remove the top plastic lid and then the freezer door.
Procedure for removing the main fridge door hinge.
Order of re-installation for fridge door, middle hinge, freezer door, and lid.
Minimum space requirements for onboard installation: 2 cm above, sides can touch furniture.
Additional 2 cm space on each side for optimal performance and energy saving.
Do not pierce sides with yellow warning label; risk of refrigerant damage.
Table detailing minimum wire sections based on diameter and length for 12V/24V.
Connect directly to battery/switch, use correct fuse/switch, avoid direct connection to charger.
Steps to remove the top plastic lid and then the freezer door.
Procedure for removing the main fridge door hinge.
Order of re-installation for fridge door, middle hinge, freezer door, and lid.
General| Brand | Isotherm |
|---|---|
| Model | CR165 |
| Category | Refrigerator |
| Language | English |
To Next Page
