Ispring CU-A4 Installation Instructions & User Manual

Packing List
Pre-assembled System
Plumber's Tape
Drinking Water Faucet
Feed Water Adapter
(Model: AFW43)
Tubing and Spare Parts Faucet Hanger
Product Features
• If the inlet water pressure is less than 20 psi, a booster pump is needed. If the inlet water
pressure is higher than 80 psi, a pressure regulator (Model: APR70) is required.
• Do not use this system with microbiologically unsafe water or which has been potentially
inadequately disinfected.
• This system is designed to be used on a cold supply only and kept away from freezing
environments.
• The installation must comply with applicable local plumbing codes and/or regulations.
• Choking hazard. Small parts are included in the package. Please keep the package out of the
reach of small children at ALL times.
If you have any questions or concerns during the installation, please contact us at
support@123filter.com or visit our help page at 123filter.com/support
Parameter
Specification
Inlet Water Pressure
20 - 80 psi
Inlet Water Temperature
40 - 100 °F
Maximum Inlet Water TDS Value
1000 ppm
Filtered Water Flow Rate
0.56 GPM @ 45 psi
www.123filter.com | (678) 261-7611 | support@123filter.com Page 2

Ispring CU-A4 Specifications

General

Brand	Ispring
Model	CU-A4
Category	Water Filtration Systems
Language	English