www.123filter.com | +1 (678) 261-7611 | Support@123Filter.com Page 5
Product Features
1) Product Scope
• For residential use ONLY.
• Applicable water requirement: It is highly recommended to use this system on municipal
water supply. Never use a water source that is microbiologically unsafe or of unknown
quality without adequate disinfection/pre-filtration.
2) Specifications
Rated Power Specifications
AC 110-220 V / 50-60 Hz, 180 W
3) Filtration Performance
Removes unpleasant chlorine, taste, odor, cloudiness, and coloring.
Removes dirt, sand, silt, rust, and scale particles and absorbs THMs
and pesticides.
Removes lead (up to 98% of lead), fluoride, arsenic, hormones,
asbestos, calcium, sodium, and more using a 0.0001 (one ten-
thousandth) micron membrane.
Improves taste, removes even more odor
4) Filter Service Life Table
Recommended Replacement Cycle
Note: The actual performance varies depending on several factors, such as water quality and
operating conditions. Factors like high TDS (500 ppm+), low temperatures (below 55°F), and
low incoming water pressure (below 25 psi) will limit the performance of the system and reduce
filter life.
To Next Page
Loading...
Need help?
General
