EasyManua.ls Logo

Ispring WGB32B User Manual

Ispring WGB32B
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
iSpring WCB/WGB Series Premium Whole House Systems
Version 2018-05
Page 1
Copyright ©2005-2018 ISPRING WATER SYSTEMS, LLC. All rights reserved.
WCB / WGB SERIES USER MANUAL Ver.06/2018
Question and Answer IconNeed help?

Do you have a question about the Ispring WGB32B and is the answer not in the manual?

Ispring WGB32B Specifications

General IconGeneral
Filtration Stages3
Micron Rating5 micron
Capacity1000 gallons
VoltageNot applicable
Power ConsumptionNot applicable
Temperature Range40-100°F (4.4-37.8°C)
Safety FeaturesBPA-free

Summary

System Overview

Product Operation and Specifications

Key performance metrics like flow rate, pressure, and operating conditions.

Installation

Step 1 - Measure the System and Cut the Pipe

Measuring and cutting the water line for proper system installation.

Step 2 - Mount the Filter Bracket

Securely mounting the filter bracket level to the wall.

Step 6 - Turn on water and flush system

Turning on water supply and flushing the system to remove fines.

Filter Change Instructions

Part 1- Remove the old cartridge

Procedure for safely removing the old filter cartridge from the housing.

Part 3- Install the New Cartridge

Steps for correctly installing the new filter cartridge into the housing.

Troubleshooting

Water Pressure Issues

Solutions for low water pressure after installation or over time.

Leaking Issues

Troubleshooting steps for leaks from the red button or housing connection.

Warranty Information

iSpring Limited Lifetime Warranty

Details of the limited lifetime warranty coverage and exclusions.

iSpring Whole House Systems Comparison Sheet

Related product manuals