iStorage DATASHUR SD - Device Status and Basic Operations

5
The datAshur SD may need to be
charged before use for 20-30 minutes
by inserting into a powered USB port.
2. Press and hold the SHIFT ( ) button for
one second.
RED and GREEN LEDs will become
solid.
3. Press and hold both KEY ( ) + 1
buttons.
LEDs turn to blinking GREEN and solid
BLUE.
4. Enter your New (8-64 digit) Admin PIN
and press the KEY ( ) button.
LEDs remain blinking GREEN and solid
BLUE.
5. Re-enter your New Admin PIN and
press the KEY ( ) button.
GREEN LED will blink indicating Admin
PIN has been successfully congured.
The datAshur SD drive is now unlocked.
6. With the GREEN LED Blinking (drive
unlocked), plug into your computer
and format before use.
Note: Once datAshur SD has been successfully
unlocked, the GREEN LED will remain blinking
for 30 seconds, during which time the
datAshur SD needs to be connected to a
powered USB port.
Formatting datAshur SD on Windows
1. A window will pop-up (image 1)
prompting that the drive needs to be
formatted before use. Click on “Format
disk”.