Do you have a question about the iStorage datashur and is the answer not in the manual?
Interface | USB 3.0 (3.1 Gen 1) Type-A |
---|---|
Read speed | 195 MB/s |
Write speed | 162 MB/s |
SSD capacity | 240 GB |
Certification | FIPS 140-2 Level 3, FIPS Pub 197 Validation, IP58 |
SSD form factor | - |
Data transfer rate | 5 Gbit/s |
Password protection | Yes |
Protection features | Dust resistant, Water resistant |
Security algorithms | 256-bit AES, FIPS 140-2, FIPS 197 |
Internal | No |
Product color | Black |
Housing material | Aluminum |
Sustainability certificates | RoHS |
Form factor | Sleeve |
International Protection (IP) code | IP58 |
USB version | 3.2 Gen 1 (3.1 Gen 1) |
Device interface | USB Type-A |
Other operating systems supported | ChromeOS |
Mobile operating systems supported | Android |
Keypad number of keys | 12 |
Quantity per pack | 1 pc(s) |
Depth | 93 mm |
---|---|
Width | 24.5 mm |
Height | 12.6 mm |
Weight | 46 g |
Dimensions (without sleeve) (WxDxH) | 24.5 x 12.6 x 93 mm |
Defines criteria for user PINs, including length and number patterns.
Guide to creating memorable PINs using key combinations for security.
Specifies criteria for Admin PINs, similar to User PIN requirements.
Table showing effects of User/Admin PIN combinations on drive access.
Step-by-step guide to formatting the datAshur using Windows OS, including FAT32/NTFS.
Instructions for formatting the datAshur on Mac OS using Disk Utility and MS-DOS (FAT).
Explains initial setup with the default User PIN and creating new PINs.
Defines what a User PIN is and its creation requirements.
Guide to creating memorable PINs using key combinations for security.