Need help?Do you have a question about the iStorage diskg and is the answer not in the manual?
Advises using the Admin PIN to reset a forgotten User PIN and warns about data loss if the Admin PIN is forgotten.
Explains how to enter Admin Mode, the default PIN, and the meaning of the BLUE LED indicator.
Details the steps to change the Admin PIN, including pressing keys, entering the new PIN, and confirmation.
Explains PIN length requirements (6-16 digits) and how to handle errors indicated by flashing RED lights.
Provides a step-by-step guide to adding a new User PIN via Admin Mode, including PIN requirements.
Details the procedure to delete all User PINs by entering Admin Mode and using specific key combinations.
Explains how to change an existing User PIN in User Mode, including entering old and new PINs.
Guides on how to set the diskG to automatically lock after a specified period of inactivity (5, 10, or 20 minutes).
Defines a brute force attack and explains how the diskG is designed to protect against it.
Details the diskG's response to multiple incorrect PIN entries, including lockouts and reset procedures.
Explains the diskG's self-destruct feature, which resets the encryption key and erases data.
Details the procedure for setting a self-destruct PIN, including entering Admin mode and choosing a new PIN.
Guides through the steps to perform a complete reset of the diskG, including holding buttons and observing LED indicators.
Emphasizes that a complete reset erases all data and requires re-initialization and formatting.
States that forgetting the Admin PIN requires a complete reset, resulting in data loss.
To Next Page
General