iStorage datashur - Formatting the Drive (Windows)

#13
www.istorage-uk.com
iStorage datAshur
®
Manual – v 3.1
#13
www.istorage-uk.com
iStorage datAshur Personal
®
Manual – v 31
4. Proceed by clicking on Format disk.
Select FAT32 or NTFS depending on your needs, enter a Volume Label and click Start.
3. The computer should notify the user with the following message:
5. Click OK to continue with formatting the drive.
6. The procedure will finish formatting the drive and confirm that formatting has been completed.
While the datAshur is formatting the BLUE LED will be flashing.
Once finished, the BLUE LED becomes solid and your datAshur is ready for use.
Warning: This procedure will erase ALL data on the drive.