COOLING SYSTEM
Note:
1. The fan center and the impeller are installed to the
water pump shaft with a press.
Never attempt to remove and reinstall the fan center
and the impeller a second time. Replace the entire
water pump assembly.
Removing and reinstalling the fan center and the
impeller a second time may result in the breakdown
of the water pump during engine operation and
subsequent serious overheating problems.
2. The water pump assembly must be replaced
whenever the fan center and impeller pressure force
falls below 200 kgf (1.96 kN).
3. Do not attempt to strike the bearing into position
with a hammer or similar object. Damage to the
bearing will result.
130
To Next Page
Loading...
Need help?
General
