Thereafter, follow a 1-year/80,000 km (50,000 mile)
inspection and re-torque interval.
Off highway and severe service operating conditions
require more frequent inspections than on highway
service operation.
Note：
・ Height sensor
Check the bracket, lever and height sensor rod for
bending and damage.
Check the bolt for looseness.
Check the length of the height sensor rod.
The height sensor ASM is adjusted and inspected with
the lever and the bracket installed. Therefore do not try to
remove the lever from the height sensor main unit unless
it is absolutely necessary.
Do not change the length of the height sensor rod from
the specified value.
16C-26 Functional Inspection (All models)
To Next Page
Loading...
