Isuzu RODEO - Basic Inspection Procedures; Service Brake Basic Inspection; ABS Ground Inspection

5A–23
BRAKE CONTROL SYSTEM
Basic Inspection Procedure
1. Basic Inspection of Service Brake
Step
Action
Yes No
1 Is the fluid level normal?
Go to Step 2
Replenish with
fluid
Go to Step 2
2 Does fluid leak? Repair
Go to Step 3
Go to Step 3
3 Is the booster function normal?
Go to Step 4
Repair
Go to Step 4
4 Is the pad and rotor normal?
Go to Step 5
Repair
Go to Step 5
5 Reconnect all components. Ensure all component are properly
mounted.
Was this step finished?
Finished Go to Step 5
2. Ground Inspection
Step
Action
Yes No
1 Does ABS—related ground points normally?
Go to Step 2
Repair
Go to Step 2
2 Reconnect all components. Ensure all component are properly
mounted.
Was this step finished?
Finished Go to Step 2