BASIC NAVIGATION TIPS
Your iTech Fusion is a full touch device, so you can swipe the screen in many directions to interact with it.
Here are a few basics to help you get started:
Exiting a section or app on watch: Push the home button on the side to exit any section quickly. Addi-
tionally, to exit an area you’re in on the watch, you can swipe right on the screen. This is universally how
you go back on this watch.
View Messages: On the main clock face, swipe up from the bottom of the screen to reveal your recent
messages. (This is the only way to view older messages you received but may have not seen right way).
Access the Notification Panel: Like many phones, your watch has a notification panel. Your notifica-
tion panel contains shortcuts that quickly take you wherever on the watch you would like to go. To view
this, on your main clock face, swipe down from the top of the screen. You can turn off your watch, view
weather, control vibration, and more! To exit this section, simply swipe up from your smartwatch.
Haptic Feedback Control: Your watch vibrates to alert you of any notifications or
reminders you need. But sometimes if you don’t want the vibration, it can become a
bother. That’s why you can control if you want vibration on or off for your watch.
To turn off vibration on your watch quickly, on your main clock face, swipe down to
reveal the notification panel. Near the ‘Weather’ icon, you will see a small device icon,
this is the vibration control section. Tap it to turn it off/on as you need to. Shutting off
vibration will also provide an even longer battery life.
Apps and Features
TIMEKEEPING
Alarms vibrate to alert you at a time you have set. Set up to three alarms to occur once or
on multiple days of the week via the iTech Fusion app. Tap and go to Alarms.
Controlling Alarms on your Smartwatch: You can toggle alarms on and off right from your
smartwatch as well. From the main clock face page, please swipe down from the main clock
face screen to reveal the notification panel. Tap on the ‘Settings’ icon to be taken to the
settings section. Navigate to Alarms and tap on it. Here, you can see the three alarms you’ve
set and have the ability to turn them off and on as you need. Please note: In order for alarm
changes to take effect, your device needs to sync with the iTech Fusion App.
You can also time events with the stopwatch feature on your iTech
Fusion Smartwatch. On the main clock face, swipe right and scroll
down to the ‘Settings’ option. Tap on ‘Stopwatch’ on the next screen.
To begin recording a time, hit the ‘Play’ button. To exit the stopwatch
function, simply swipe right on the screen.