ITech IT6333B

System Commands
Copyright© Itech Electronic Co., Ltd. 20
Command syntax
STATus:PRESet
Arguments
None
STATus:QUEStionable:INSTrument[:EVENt]?
This command can query the parameter of event register in the channel. When
the query value is returned, the register is reset.
Query syntax
STATus:QUEStionable:INSTrument[:EVENt]?
Arguments
None
Returns
<Nrf>
STATus:QUEStionable:INSTrument:ENABle
This command can re-write the parameter of query enable register in the
channel.
Command syntax
STATus:QUEStionable:INSTrument:ENABle
Arguments
Register parameter
Query syntax
STATus:QUEStionable:INSTument:ENABle?
STATus:QUEStionable:INSTrument:ISUMmary1[:EVEN
t]?
This command can query the event register in channel 1. When the query value
is returned, the register is reset.
Query syntax
STATus:QUEStionable:INSTrument:ISUMmary1 [:EVENt]?
Arguments
None