IT6300 User Manual
Copyright © Itech Electronic Co., Ltd. v
Failure to use the instrument as directed by the manufacturer may render
its protective features void.
Always clean the casing with a dry cloth. Do not clean the internals.
Make sure the vent hole is always unblocked.
Environmental Conditions
The instrument is designed for indoor use and an area with low condensation.
The table below shows the general environmental requirements for the
instrument.
20%-80% (non-condensation)
Operating up to 2,000 meters
Note
To make accurate measurements, allow the instrument to warm up for 30 min.
Regulatory Markings
The CE mark indicates that the product complies with
all the relevant European legal directives. The
specific year (if any) affixed refers to the year when
the design was approved.
The instrument complies with the WEEE Directive
(2002/96/EC) marking requirement. This affix product
label indicates that you must not discard the
electrical/electronic product in domestic household
waste.
This symbol indicates the time period during which
no hazardous or toxic substances are expected to
leak or deteriorate during normal use. The expected
useful life of the product is 10 years. The product can
be used safely during the 10-year Environment
Friendly Use Period (EFUP). Upon expiration of the
EFUP, the product must be immediately recycled.
To Next Page
Loading...
