ITech IT6512 - Voltage Monitoring via Analog Interface; Current Monitoring via Analog Interface

Return parameter：MIN~MAX
LIST:REPeat
This command is used to edit the running times of list file.
Command syntax：LIST:REPeat <NR2>
parameter：1~65535
inquiry syntax：LIST:REPeat?
Return parameter：1~65535
LIST:LINK:SEQuence
This command is used to edit the list sequence to be linked.
Command syntax：LIST:LINK:SEQuence <NR2>
parameter：0~1023
inquiry syntax：LIST:LINK:SEQuence?
Return parameter：0~1023
LIST:SEQuence:REPeat<NR1><，NR1>
This command is used to edit the running count of sequence which is linked to the List file.
Command syntax：LIST:SEQuence:REPeat<NR1><，NR1>
Parameter:Parameter1 represents the sequence number,parameter2 corresponds to the
running count of sequence（1~65535）.
Inquiry syntax：LIST:SEQuence:REPeat? <NR2>
Return parameter：0~65535
LIST:SAVe
This command is used to save the list file in a nonvolatile memory.
Command syntax：LIST:SAVe
parameter：None