ITech IT6512A - Page 24

Function and Features
Copyright ©ITECH Electronic Co., Ltd. 17
Group = 0
0:represents 1-10sets；
1:represents:11-20sets,
by parity of reasoning
Buzzer
On(Def)
enable the buzzer function
Off
disable the buzzer function
Communication
Select the communication interface
RS232(Def)
Select RS232 communication interface
4800, 8, None parity 1 , Addr...
9600 Odd parity (0~31)
19200 Even parity
38400
57600
115200
USB
Select USB communication interface
GPIB
Select GPIB communication interface
Addr= 0 set the communication address
RS485
Select RS485 communication interface
4800, 8, None parity, 1 , Addr...
9600 Odd parity (0~31)
19200 Even parity
38400
57600
115200
ReturnMeter
Enables automatic delay to switch
display from setting to measured value
(meter).
OFF
Return Meter function disabled.
Delay
Enables return meter function
P-Out
P-On output
Power whether power supply was on
Off(def)
After power on,the instrument will be in
the off state.
Last
If output was on prior to turning the
power off,the ON state will be resumed
after power on.
Sense-Protect
Enable(Def)
Enable sense protection function
Disable
Disable sense protection function
Config
Load Load setup
Enables dummy load to increase speed of
voltage fall time.
Off
Disables the dummy load (default).
On
Enables the dummy load.