ITech IT6720 User Manual

Enable output
Press to enable the IT6720 output.
Voltage and current settings will be
wink for three seconds, and after that ,
the display value of numerical display
will change from the set value to actual
measured voltage and current value.
Power off lights will be turned off which
means the power is in output state.
Press again, you will shut power
supply’s output.
On/Off
On/Off
V
A
CV CC
OVP OCP
OFF
Shift
Lock
Prog
ITECH
A
B
C
D
IT672060V/5A/100W
Auto Range DC Power Supply
Output off indicator
Cursor position Step voltage Step current
10V 1A
1V 0.1A
0.1V 0.01A
0.01V 0.001A
A
B
C
D
Step value for Cursor Position
Check the set voltage and current value
The power supply usually displays the actual voltage and current values. When you want to check
the preset voltage and current values, the unit will display automatically settings, press twice,
the settings will be displayed for three seconds.
Shift
Key lock function
This function can prevent error operation by unauthorized person. Press , after the was
lit on, press (Lock) , will be lit on, which means all keys on the panel except and
. Repeat above operation, key lock function will be disabled.
Shift
Shift
C
C
C
Shift
Lock
On/Off
Quick Start
USER’S GUIDE 7

ITech IT6720 Specifications

General

Brand	ITech
Model	IT6720
Category	Power Supply
Language	English