ITech IT6821 - Input Measurement Order

13
Quest syntax：ONPut:STATe?
Return parameter：0|1
[SOURce:]CURRent [:LEVel]
This order can set current value of power supply.
Order syntax：[SOURce:]CURRent [:LEVel] <NRf>
Parameter：MIN TO MAX|MIN|MAX
Unit：A mA
*RST value: MIN
Example： CURR 3A， CURR 30mA， CURR MAX， CURR MIN
Quest syntax：[SOURce:]CURRent [:LEVel]？
Parameter：[MIN|MAX]
Example：CURR？, CURR？ MAX, CURR？MIN
Return parameter：<NR2>
[SOURce:]VOLTage[:LEVel]
This order can set voltage value of power supply.
Order syntax：[SOURce:]VOLTage[:LEVel] <NRf>
Parameter：MIN TO MAX|MIN|MAX
Unit：V mV kV
*RST value：MAX
Quest syntax：[SOURce:]VOLTage[:LEVel]？
Parameter：[MIN|MAX]
Return parameter：<NR2>
[SOURce:]VOLTage:PROTection[:LEVel]
This order can set voltage protection maximum level.
Order syntax：[SOURce:] VOLTage:PROTection[:LEVel] <NRf>
Parameter：MIN TO MAX|MIN|MAX
Unit：V mV
*RST value：
MAX
Example：VOLT:PROT 30V, VOLT PROT MAX
Quest syntax：[SOURce:] VOLTage:PROTection[:LEVel]？
Parameter：[MIN|MAX]
Example：VOLT:PROT？, VOLT PROT？ MAX
Return parameter：<NR2>
4.4 Input measurement order
MEASure[:SCALar]:VOLTage[:DC]?
This order can get the input voltage of power supply.
Order syntax：MEASure[:SCALar]:VOLTage[:DC]?
Parameter：None
Return parameter：〈NR2〉
Return parameter unit：V
Example：MEAS:VOLT？