ITech IT8512A+ Manual

18
4
th
byte
LIST operation mode（0 is CC mode）
From 5
th
to 25 byte
System reserve
26
th
byte
Sum code
16. Set / Read the list repeat mode. (3CH/3DH)
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（3CH/3DH）
4
th
byte
LIST repeat operation mode(0 is ONCE, 1 is REPEAT,65535 represents no limit)
From 5
th
to 25
th
byte
System reserve
26
th
byte
Sum code
17. Set / Read list step counts. (3EH/3FH)
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（3EH/3FH）
From 4
th
byte to 5
th
byte
LIST steps count
From 6
th
to 25
th
byte
System reserve
26
th
byte
Sum code
18. Set / Read one of the step’s current and time values. (40H/41H)
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（40H/41H）
From 4
th
byte to 5
th
byte
Appointed one step
From 6
th
to 9
th
byte
Current value of current step (Lower bytes are in the front location, higher bytes
are in the later location)
From 10
th
to 11
th
byte
Time value of current step (Lower bytes are in the front location, higher bytes are
in the later location) (1 represent 0.1mS)
From 12
th
to 25
th
byte
System reserve
26
th
byte
Sum code
19. Save / Recall list file in appointed area.. (4CH/4DH)
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（4CH/4DH）
4
th
byte
Storing area (1 ~ 7)
From 5
th
to 25
th
byte
System reserve
26
th
byte
Sum code
20. Setting / Reading timer value of FOR LOAD ON (50H/51H）
1
st
byte
Start bit ( AAH )
2
nd
byte
Address (0—31,0XFF)
3
rd
byte
Command（50H/51H）

ITech IT8512A+ Specifications

General

Brand	ITech
Model	IT8512A+
Category	Test Equipment
Language	English