ITech IT8513C+ Programming Guide

Input Settings
Copyright © ITECH Electronic Co., Ltd. 37
Command Syntax
[SOURce:]DYNamic:HIGH[:LEVel] <NRf+>
Parameters
MIN~MAX|MINimum|MAXimum
Unit
A
*RST Value
0
Examples
DYN:HIGH 10
Query Syntax
[SOURce:]DYNamic:HIGH[:LEVel]?
Returned Parameters
<NR2>
[SOURce:]DYNamic:HIGH[:LEVel]?
This command is used to query the high-level load current in dynamic mode.
Command Syntax
[SOURce:]DYNamic:HIGH[:LEVel]?
Parameters
None
Unit
A
*RST Value
MIN
Examples
DYN:HIGH 10
[SOURce:]DYNamic:HIGH:DWELl <NRf+>
This command is used to set the duration of high-level load current in dynamic
mode.
Command Syntax
[SOURce:]DYNamic:HIGH:DWELl <NRf+>

ITech IT8513C+ Specifications

General

Brand	ITech
Model	IT8513C+
Category	Test Equipment
Language	English