i
COPYRIGHT
Copyright © by Align Technology Inc. 2017. All rights reserved.
The information contained in this manual is subject to change without notice.
The hardware and software described in this manual are supplied under a Sales and Services Agreement
and may be used only in accordance with the terms of that agreement.
No part of this manual may be reproduced, photocopied, stored in a retrieval system, or transmitted in any
manner (electronic or mechanical) for any purpose other than the customer’s normal usage, without the prior
written permission of Align Technology Inc.
This manual describes the iTero
®
Element
™
Optical Impression Device.
English language version. Updated December 2017.
TRADEMARKS
The following are trademarks and/or service marks of Align Technology, Inc. or one of its subsidiaries or
afliated companies and may be registered in the U.S. and/or other countries: Align Technology Inc., iTero
®
Any other trademarks or registered trademarks appearing in this manual are the property of their respective
owners.
CUSTOMER SUPPORT
Tel: +1 (800) 577-8767
E-mail:
iterosupport@aligntech.com
E-mail:
orthocadsupport@aligntech.com
EUROPEAN AUTHORIZED REPRESENTATIVE
Obelis s.a.
Boulevard Général Wahis 53
B - 1030 Brussels, Belgium
www.obelis.net
Tel: +32.2.732.59.54
Fax: +322.732.60.03
E-mail: zmail@obelis.net
USA OFFICE
Corporate Headquarters
Align Technology, Inc.
2820 Orchard Parkway
San Jose, California 95134
www.aligntech.com
Tel: +1 (408) 470-1000
Fax: +1 (408) 470-1010
Align Technology Ltd.
3 Ariel Sharon Boulevard
Or-Yehuda 6037606
Israel
Tel: +972 (3) 634-1441
Fax: +972 (3) 634-1440
NETHERLANDS OFFICE
International Headquarters
Align Technology B.V.
Arlandaweg 161
1043 HS Amsterdam
Tel: +31 (0) 20-586-3600
Fax: +31 (0) 20-586-3751
To Next Page
Loading...
