HMPRO35 OPERATOR’S MANUAL
3 www.itmtools.com.au
TRADEMASTER
Magnetic Base Drilling Machines
Tools and Machinery
AIR
1. GENERAL INFORMATION
1.1. Application
The PRO 35 is a drilling machine with electromagnetic base, designed to drill holes
with diameters of up to 35 mm to a depth of up to 51 mm by using annular cutters.
The electromagnetic base allows the drilling machine to be fixed to ferromagnetic
surfaces
with a force that ensures operator safety and proper machine operation.
A safety strap protects the machine from falling in case of a power loss.
1.2. Technical data
Voltage 1~ 220–240 V, 50–60 Hz
Total power 1000 W
Motor power 920 W
Tool holder 19 mm Weldon (3/4’’)
Maximum drilling diameter 35 mm
Maximum drilling depth 51 mm
Electromagnetic base holding force
(surface with the thickness of 22 mm and roughness R
a
= 1.25)
9 000 N
Electromagnetic base dimensions 80 mm × 160 mm × 38 mm
Stroke 70 mm
Rotational speed under load 350 rpm
Minimum workpiece thickness 6 mm
Protection class I
Noise level More than 85 dB
Required ambient temperature 0–40°C
Weight 10 kg
To Next Page
Loading...