To Next PageTo Next Page
Need help?Do you have a question about the ITRON 133 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Communication Interface | RS-485 |
| Protocol | Modbus RTU |
Describes the selectable mounting orientations for the regulator unit.
Explains requirements for connecting the impulse sensing line to the regulator.
Specifies breathing line connection sizes based on length requirements.
Provides a step-by-step guide for the safe initial operation of the regulator.
Guides on how to adjust the outlet pressure and shut-off points.
Lists the specific tools required for regulator adjustment and orifice replacement.
Details the specific keys needed for changing the regulator's orifice size.
Procedure for putting the upper and lower safety shut-off valves into operation.
Procedure for putting the upper safety shut-off valve into operation.
Specific safety instructions for operating the regulator in potentially explosive atmospheres.
Specifies maximum tightening torques for various housing and flange connections.
Details the maximum permissible torque values for assembly components.
Specifies the maximum torque values for screw tightening during assembly.
Illustrates the connection of regulator and safety valve with external impulse line.
