Need help?Do you have a question about the ITRON RR16 and is the answer not in the manual?
General| Manufacturer | ITRON |
|---|---|
| Model | RR16 |
| Operating Voltage | 24 VDC |
| Communication Protocol | Modbus RTU |
| Number of Relays | 16 |
| Enclosure | Plastic |
| Protection Class | IP20 |
| Operating Current | 100 mA |
| Relay Type | Electromechanical |
| Input Voltage | 24 VDC |
| Output Voltage | 24 VDC |
| Humidity | 5 to 95% RH, non-condensing |
Details of actuator and body components.
Information on orifice and valve seats.
Details on membrane and inspection plate.
List of materials for components.
Overview of the RR 16 regulator's function and applications.
Key technical specifications like pressure, temperature, medium.
Guide for selecting the correct RR 16 model.
Spring ranges for standard RR 16 models.
Spring ranges for RR 16 KF models.
Spring ranges for RR 16 Ü relief regulator.
Spring ranges for various SSV types.
Set point limits for SSV types.
Crucial safety guidelines for handling and installation.
Specified torque values for flange connections.
Guidelines for handling and cleaning the regulator.
Notes for use in explosive atmospheres and EX-protection status.
Official declaration of conformity to EU directives.
Instructions for proper installation and recommended position.
Guidelines for sensing and breathing line connections.
Step-by-step guide for starting up the regulator.
How to adjust regulator and SSV set points.
Procedures for service and repair of the regulator.
Information on damping measures and units.
Details on flow discs for specific flow rate ranges.
Instructions on how to install the flow disc.
Instructions for assembling the silencer.
Instructions for SSV position indicator assembly.
Technical specifications for the BV valve.
Guidelines for installing the BV valve.
Steps for starting up SSV type 033.
Steps for starting up SSV type SL-IZ.
Steps for starting up SSV type 022.
Steps for starting up SSV type SID.
Technical drawings showing regulator dimensions.
Table listing dimensions for various regulator models.
Detailed dimensions for SSV types F through J.
Weight and fastener thread information for SSV.
A diagram illustrating a typical regulator installation.
Additional tables for SSV dimensions and weights.
Installation example shown in French and Russian.
Installation example shown in Czech.
To Next Page
