Need help?Do you have a question about the ITRON RR 16 and is the answer not in the manual?
General| Brand | ITRON |
|---|---|
| Model | RR 16 |
| Category | Controller |
| Language | English |
Overview of the RR 16 regulator, including its function, technical specifications, and operating parameters.
Details on spring numbers, colors, and wire diameters for various actuator and DN configurations.
Spring specifications for the KF (short spring-housing) variant of the RR 16 regulator.
Spring specifications for the relief regulator variant (Ü) of the RR 16.
Spring specifications for SAV 033, SL-IZN.1/M.1, 022, and SID-N/M OPSO/UPSO safety shut-off valves.
Defines the maximum set points for SSV valves based on the regulator actuating drive diaphragm size.
Recommended torque values for tightening flange connection screws according to size and material.
Table listing the inner chamber volumes for different sizes of the RR 16 regulator.
Important considerations for using the regulator in potentially explosive atmospheres, including protection and grounding.
Confirmation that the device has no ignition sources and does not fall under ATEX directives.
Manufacturer, conformity assessment, harmonized standards, and notified body information for the regulator.
Guidance on checking the regulator, pipe alignment, cleaning, and flow direction before installation.
Details on sensing line and breathing line connections, including size and material recommendations.
Steps for initial start-up and how to adjust the regulator's set point pressure.
Lists the required tools for adjusting different actuator units and SSV types.
Information on damping units and measures to reduce noise or vibrations.
Specifications for the BV manipulation valve, including nominal width, operating pressure, and temperature range.
Guidance on installing the BV manipulation valve, emphasizing flow direction alignment with the valve body.
Step-by-step procedure for the safe start-up of the SSV 033 safety shut-off valve.
Step-by-step procedure for the safe start-up of the SL-IZ safety shut-off valve.
Step-by-step procedure for the safe start-up of the SSV 022 safety shut-off valve.
Step-by-step procedure for the safe start-up of the SSV SID safety shut-off valve.
To Next Page
