To Next PageTo Next PageWhy are ITRON CENTRON C1S Measuring Instruments giving erroneous readings on light load tests?
Erroneous readings during light load tests on ITRON Measuring Instruments are often due to improper 'jogging'. To resolve this, sequence the test in order of applied power, ensuring the lowest power is tested first.
General| Brand | ITRON |
|---|---|
| Model | CENTRON C1S |
| Category | Measuring Instruments |
| Language | English |
Overview of the CENTRON meter family's capabilities and design.
Describes Normal, Alternate, and Test modes for meter operation.
Details how display items and sequences are set via programming software.
Explains how to perform a demand reset and its resulting events.
Covers the capability for time-based energy and demand registration.
Explains how demand values are calculated using various parameters.
Guide to diagnosing and resolving issues with the meter.
Lists and explains error codes for specific meter functions.
Addresses common problems like blank displays and incorrect readings.
Specific troubleshooting for C1S LCD and C1SR modules.
