iTrue X3 - Restore Factory Setting; Playback Mode

33
Getting Started
Operation of your X3 HD Digital Roadcorder
TM
Restore Factory Setting (Default Setting)
Set the system parameters to the default value.
1 Press on MENU
2 Press on UP or DOWN button to navigate to the function that shows
DEFAULT SET
3 Press on OK
4 Press on the UP or DOWN button to make your selection
5 Press on OK to confirm your entry
6 Press on MENU to exit Setting
Playback Mode (Video)
1 Stop recording by pressing on the OK button
2 Press 3x MODE to switch from recording to playback mode
3
Press and hold UP or DOWN button to navigate thru the video files
4 Press on OK once you have found the file you wish to play
5 Press on OK again to START playing
6 Press on OK again to PAUSE playing
7 Press on MENU to STOP playing
8 FAST FORWARD : Press the UP button to forward your video to 2X / 4X /
8X speed mode with each press
9 REWIND : Press the DOWN button to slow forward your video to -2 X / -4
X / -8 X speed mode with each press
10 Press and hold UP or DOWN button for volume control