iTrue X3 - Page 43

43
General Troubleshooting
Question
Reason
Solution
No image is displayed on a
high-definition TV screen
1 Cable plug might not be
plugged in properly.
2 Wrong TV Input mode
1 Ensure AV/HDMI cable is plug into
the TV properly.
2 Refer to the back panel of your T
V
to Track the correct TV input. Make
sure you have selected the correct
input.
Hazy Images
Lens might be dirty.
Check if there are fingerprints or
dust on the lens. Clean it with a
micro fabric cloth if necessary.
There are horizontal
stripes interference on
the image
This could be due to
wrong light frequency
setting
Please set according to the local
power supply respectively;50Hz
or 60Hz. For SG/MY:50hz
No image is displayed on
a high-definition TV
screen
1 Cable plug might not be
plugged in properly.
2 Wrong TV Input mode
1 Ensure AV/HDMI cable is plug
into the TV properly.
2 Refer to the back panel of your
TV to track the correct TV
input. Make sure you have
selected the correct input.