Need help?Do you have a question about the iTrust UH11-0060 and is the answer not in the manual?
Lists actions that are forbidden to prevent hazards and damage to the UPS and users.
Highlights important points to consider for safe operation, installation, and maintenance.
Highlights the key technical features and benefits of the iTrust series UPS.
Explains the components and functions of the UPS LCD control panel.
Details the components and connections on the rear panel of the UPS.
Crucial precautions and environmental requirements before UPS installation.
Describes the four operating states: Normal, Bypass, Battery, and Fault modes.
Covers UPS behavior and indicators during internal faults or overtemperature.
Step-by-step guide to powering on the UPS unit.
Instructions on configuring various UPS operational parameters.
Addresses issues with no panel display or system self-test upon power-on.
Diagnoses problems with the mains indicator not shining while the UPS is in Battery mode.
Resolves situations where there is no voltage output but no alarm is indicated.
Fixes for the UPS not starting up after the ON button is pressed.
Explains the cause and solution for a flashing mains indicator.
To Next Page
General