Need help?Do you have a question about the iTrust UH11-0100L and is the answer not in the manual?
Details the intended applications for the iTrust series UPS.
Lists available UPS models, including 6kVA and 10kVA variants.
Illustrates single-unit and master/slave hot standby system configurations.
Highlights the advanced features and technologies of the iTrust UPS system.
Covers the physical appearance of the UPS units, including the LCD panel and rear panel components.
Procedure for checking the UPS unit and accessories after unpacking.
Details on installation precautions and the steps for UPS installation.
Instructions for wiring UPS units in a master/slave redundant configuration.
Details the four main operating modes of the UPS.
Step-by-step guides for system startup, parameter setting, and shutdown.
Describes how the UPS automatically switches between operational modes.
Information on monitoring the UPS status via software or panel.
Covers navigating menu levels and LCD display priority rules.
Guidelines for checking and maintaining the UPS cooling fans.
Recommendations for maintaining battery health and lifespan.
Instructions for keeping air vents clean and unblocked for proper ventilation.
Procedures for checking the operational status and fault indicators of the UPS.
Periodic checks to ensure all UPS functions are operating correctly.
Contact methods for obtaining technical support and service.
Details on the warranty period, terms, and exclusions for the UPS.
Configuration and functions for RS-232 serial communication.
Configuration and functions for dry contact signaling.
Guidelines for proper grounding of the UPS for safety and performance.
Details on surge protection devices (SPD) and lightning protection.
To Next Page
General