iTrust UH11-0100L - Appendix 3 Technical Specifications

Appendix 3 Technical Specifications
89%88%Efficiency
120 ~253Vac Bypass voltage
105~125% rated load, 5min; 125~150% rated load, 10sOverload capacity
≤
60mS
Transient
recovery time
5% at 100% load step change resistive load
Dynamic
response
≤
4% linear load
≤
5% nonlinear load
Voltage harmonic
distortion
3:1Crest factor
0.7Power factor
≤
1Hz/S
Frequency
synchronization
speed
In Normal mode: synchronizes the bypass frequency
when the bypass frequency is within 50Hz 10%; is
50Hz
0.2% when the bypass frequency is outside
tolerances.
In Battery mode: is 50Hz 0.2%
Frequency
220Vac±2%Voltage
10kVA/7kW6kVA/4.2kWPower rating
Output
≥
0.99Power factor
50Hz±5HzFrequency
176-276Vac, full load;
120-176Vac, linear derating
in loading;
120Vac, half load.
160-276Vac, full load;
120-160Vac, linear
derating in loading;
120Vac, half load.
Voltage range
220VacRated voltage
Input
UH11-0100LUH11-0060L
UH11-0100UH11-0060
Model
Appendix 3 Technical Specifications 55
E1-20010916-C-1.0