6 MAINTENANCE AND CLEANING PROCEDURES
It is the User’s responsibility to keep the ice machine and ice storage bin in a sanitary condition.
Ice machines also require occasional cleaning of their water systems with a specifically designed
chemical. These chemical dissolves mineral build up that forms during the ice making process.
Sanitize the ice storage bin as frequently as local health codes require, and every time the ice
machine is cleaned and sanitized.
The ice machine’s water system should be cleaned and sanitized at least twice a year.
CAUTION: Do not mix Ice Machine Cleaner and Sanitizer solutions together.
WARNING: Wear rubber gloves and safety goggles when handling Ice Machine Cleaner or
Sanitizer.
WARNING: Unit should always be disconnected during maintenance/cleaning procedures.
6.1.- CLEANING WATER DISTRIBUTION SYSTEM
a) Set the switch to the OFF position after ice falls from the evaporator at the end of a harvest
cycle or set the switch to the OFF position and allow the ice to melt off the evaporator.
CAUTION: Never use anything to force ice from the evaporator.
b) Remove all ice from the bin.
c) (ONLY NG30) Remove the back panel and the top panel. Remove the auxiliary pipe for
drain operations near the pump and empty the water tray. Return it to their original position
to avoid water spill.
To Next Page
Loading...
Need help?
General
