1
R50 Blue Bar 5101171 Rev. L
1. SAFETY WARNINGS
NOTE! – Statements identified with a NOTE indicate precautions necessary to avoid
potential equipment failure.
CAUTION! – Statements identified with a CAUTION indicate minor or moderate
injury is possible.
WARNING! – Statements identified with a WARNING indicate serious injury is
possible.
NOTE! – This equipment must be correctly installed and maintained. Adhere
to the following notes for safe installation and operation.
1. Read instruction manual before operating or installing device.
2. Qualified service personnel must do installation and repairs.
3. Ground the frame of the machine on which the power supply and neutralizing bars
are mounted.
4. Disconnect supply voltage to power supply before connecting neutralizing bar to the
high voltage terminal strip.
CAUTION! – Electrical Shock Hazard
1. Do not touch bar when power supply is energized.
2. Disconnect supply voltage to power supply before connecting bar or
performing any maintenance to the system.
WARNING! – Fire Hazard
Do not install or operate equipment in close proximity to any flammable
solvents or flammable materials.
To Next Page
Loading...
Need help?
General
