ITW SIMCO-ION D165 User Manual

9
Power Units (All Potted Models)
5200095 Rev C
5. OPERATION
Before placing the static eliminating equipment into operation, make certain all
connections including grounds have been completed as described in Section 2. Make
certain the static eliminating equipment is properly installed.
To operate the static eliminating equipment, apply line voltage to the power unit. For
power unit equipped with an ON/OFF switch, place the switch to the ON position.
CAUTION – Electrical Shock Hazard
Do not launch high voltage outlet when power unit is energized. Turn off power
unit when equipment is not in use.
ACHTUNG – Stromschlaggefahr
Berühren Sie nicht die Hoschspannungsausgiinge, wenn das Nelzgerät in Betrieb
ist, Schalten Sie das Netzerät ab, wenn es nicht in Betrieb ist.
ATTENTION – Danger d’élctrocution
Ne pas toucher les sorties haule tension lorsque I’alimentation est en marche.
Eteindre I’alimentation lorsque celle-ci n’est pas en service.

ITW SIMCO-ION D165 Specifications

General

Brand	ITW
Model	SIMCO-ION D165
Category	Industrial Equipment
Language	English