The saved file is in ".csv" or ".txt" format and the data is in order of follows.⑥
Storage number, Positive Decay time, Negative Decay time, Average voltageof
Ion balance, Maximum voltage of Ion balance Peak value , Minimum voltage()
()of Ion balance valley value
CAUTION
If there is a case of overtime in the decay time measurement, the data will be saved
as "0. 1".-
8.4 Deletion of saved data in EA-5J
The data saved in EA-5J can be deleted by following procedures.
Turn the power on by pressing POWER button blue . Be sure that the LCD①()
display shows auto mode Au .()
Press SAVE button. At this time, the number one added to saved data is shown on②
the display.
Press RESET button by a thin stick 1 2 mm diameter . Then all of the saved③(～)
data will be deleted completely.
The number of saved data is restarted from "0" when data is saved in next auto④
mode measurement.
-page33-
To Next Page
Loading...