Section 1. General description
Simco-Ion Model EA-5J Charge Plate Monitor CPM is a compact instrument usedfor()
measuring the ionizer's performance. It is small, portable, handy and easytouse.
It was designed to provide quantitative, accurate measurements for a variety of air
ionization tests. It can be easily used for Discharge time Decay time and Ion Balance()
measurements for the ionizers. It is the most suitable for the routine inspection as a
support for the maintenance of ionizers, the selection and the evaluation of the ionizers
and soon.
It has a micro-computer inside and it is a multi-function instrument. Seven color button
switches placed on the surface make measurements easy.
There are two measurement modes such as Manual mode and automatic mode Auto(
mode .)
Manual mode is used for individual measurement Discharge time / Ion Balance.The()
measurement conditions can be changed by a SET button placed below LCD.
In Auto mode, both measurements of discharge time and ion balance can be done
automatically by pressing a Plate Control button once. The measurement conditions are
according as the set in the manual mode. After the measurements, each measuring data
can be memorized up to 1,000 by pressing a SAVE button. The saved data can be
down-loaded to a personal computer as CSV or TXT form using a USB cable. It will be
help for reduction of the input work to a personal computer of the measurement data.
A large digital LCD helps to confirm the measured value. The plastic enclosure must be
grounded using a grounding lead provided for accurate measuring.
-page4-
To Next Page
Loading...
Need help?
General