Need help?Do you have a question about the Ivoclar Vivadent Programat EP 3000 G2 and is the answer not in the manual?
General| Brand | Ivoclar Vivadent |
|---|---|
| Model | Programat EP 3000 G2 |
| Category | Dental equipment |
| Language | English |
Welcome message and introduction to the Programat EP 3000/G2 furnace.
Explains the meaning of signs and symbols used in the document and on the furnace.
Information regarding different voltage versions of the furnace.
Specifies the intended use of the furnace and contraindications.
Provides essential safety guidelines and precautions for operating the furnace.
Lists and describes the main parts of the Programat EP 3000/G2.
Identifies hazardous zones and the safety features of the furnace.
Explains the basic working principles and capabilities of the furnace.
Lists optional accessories that can be used with the furnace.
Instructions for safely unpacking and verifying all furnace components.
Guidance on choosing a suitable and safe place for furnace installation.
Detailed instructions for assembling the furnace, including connecting parts.
Procedure for safely detaching the furnace head from the base unit.
Steps for powering on the furnace and conducting the initial self-test.
Overview of the furnace's graphical display and keypad operation.
Details the purpose and operation of various control keys and functions.
Describes how firing and press programs are organized and managed.
Lists configurable parameters and their permissible values for programs.
Options for configuring furnace behavior like contrast, temperature mode, and volume.
Details on using specific programs like Vacuum Test and Cleaning.
Accessing system information such as serial number and software version.
Interpretation of icons and symbols shown on the furnace display.
Explains the meaning and timing of the furnace's audible signals.
Instructions for powering the furnace on and off safely.
Guide to selecting and running firing programs for dental materials.
Instructions for selecting and executing press programs.
Method for directly selecting firing programs by their number.
How the furnace indicates incorrect parameter inputs.
Visual indicators for different types of errors encountered during operation.
Procedures for pausing or aborting an active firing or press program.
Instructions for updating the furnace's software via PC.
Explanation of the energy-saving function and its activation.
Recommended checks and maintenance tasks for the furnace.
Guidelines for cleaning different parts of the furnace to maintain performance.
Steps for performing temperature calibration using the ATK 2 set.
Information on service intervals and optimal stand-by conditions.
Detailed instructions for replacing the press plunger component.
Lists and explains common error codes displayed by the furnace.
Describes issues that may occur without error messages and their solutions.
Guidance on who should perform repairs and warranty considerations.
How to reset the furnace to its original factory configuration.
Lists all items included in the furnace package.
Lists optional accessories recommended for use with the furnace.
Provides detailed technical specifications, power, and dimensions.
Specifies environmental requirements for optimal furnace operation.
Guidelines for safely transporting and storing the furnace.
Information on where to find program tables and how to download them.
Visual representation of the furnace's menu navigation and program selection.
To Next Page