Need help?Do you have a question about the Ivoclar Vivadent Programat CS6 and is the answer not in the manual?
Explains the furnace's intended use for dental applications and safety symbols.
Guides through unpacking, connecting, and initial configuration.
Explains the control interface, program selection, and settings.
Details program editing, calibration, data backup, and software updates.
Describes loading the furnace and running firing programs.
Outlines routine checks, cleaning, and stand-by recommendations.
Lists common errors, their causes, and solutions.
Instructions for fuse replacement and factory resets.
Comprehensive safety warnings and guidelines for risk prevention.
Specifies conditions for storage, transport, and technical specifications.
Lists included items and CE declaration details.
General| Category | Dental equipment |
|---|---|
| Power Supply | AC |
| Voltage | 230 V |
| Control | Touchscreen |
| Programs | Yes |
| Weight | 30 kg |
| Chamber Dimensions | Ø 90 mm / height 80 mm |
| Temperature Range | 100 – 1200 °C |
| Firing Temperature | Up to 1200 °C |
| Dimensions | 410 x 460 x 350 mm |
To Next Page
