17
Optical Status Display (OSD)
The Optical Status Display (OSD) (12) shows the most important statuses of the furnace. The following activities are indicated:
Shade Activity
Yellow The furnace is performing the self-test or is not ready for use.
Yellow (flashing) Information, note or error message
Green The furnace is ready for use; the currently selected program can be started.
Orange Program is closing the furnace head or is in predrying mode
Red Program is heating up or is in holding time mode
Blue Program is in its cooling phase or opening the furnace head
User code
For safety reasons, a user code is required for certain settings. The user code ex factory
is as follows:
1234
The user code can be individually changed. See Chapter Settings 2.2.4.1. for details.
2.2.2 Firing programs and programming options
2.2.2.1 Program structure
The furnace offers two program types:
a. Programs for Ivoclar Vivadent materials
When the furnace is delivered ex works, the Ivoclar Vivadent programs already contain the recommended material
parameter settings and are write-protected. Consequently, it is not possible to accidentally overwrite the programs.
In case of software updates, individually changed parameters in Ivoclar Vivadent programs might be reset to the
factory settings or changed!
b. 40 free, individually adjustable programs
The programs are designed in such a way that up to three heating and two cooling stages can be set. The programs
can be individually named.
In case of software updates, individually changed parameters in free programs are NOT reset to the factory
settings or changed!
2. Application
To Next Page
Loading...
