6
Dear Customer
Thank you for having purchased the Programat
®
CS6. It is a
state-of-the art sinter, crystallization and glaze furnace for
dental applications.
The Programat CS6 is suitable for the sintering and glazing of
zirconium oxide materials such as IPS e.max
®
ZirCAD as well as
the crystallization and glazing of e.g. IPS e.max CAD. The
furnace has been specifically developed for these purposes.
Inappropriate use may damage the equipment and be harmful
to personnel.
Please observe the relevant notes and read the Operating
Instructions carefully.
We hope you enjoy working with the Programat CS6.
Introduction
To Next Page
Loading...
